If you are missing a feature or
have any idea to make
MonitoringExchange better
than now, please let us know.
Check Ethernet-Interface (Visit this link)
from 0 votesA simple network-interface status check-plugin (based on bash and mii-tool)
This plugin lets you check network interfaces. it tells you if a local interface is ok and a cable is connected. For using-information have a look in the shell-shript.
(based on bash and mii-tool)
Rework by dvayntrub2 using ethtool:
https://www.monitoringexchange.org/p/1665
Submitted by: voltshock
Hits: 2121
Overall downloads: 504
Added: 2008-10-18 00:00:00
Last Modified: 2010-06-10 19:08:51
| Filename | Preview | Size | Description | DL |
|---|---|---|---|---|
| check_network | 2 kb | check_network | 1936 |
Comments
Leave a reply
If you just want to rate the project leave the other field empty.
Even though it would be nice if you would drop a line.
-
check_interface_table_v2.pl
3 from 1 votesAs stated on the original check complete interface table page this plugin allows you to monitor one network device (e.g. router, switch, server) without knowing each interface in detail. Only the hostname (or ip address) and the snmp community string are required. But additional to the original this 2nd version gives you performance data for all the interfaces if you wish. And furthermore it calculates the interface load and informs you on configured VLANs. Check Live-Demo here: http://nagios.demo.netways.de/nagios/cgi-bin/status.cgi?host=f1-switch -
check_netstat
5 from 1 votesThis plugin checks number of open tcp connections and can send warnings or critical alert of there are too many or too few. Can run either directly on the box or use SNMP. -
check_apache_status
3 from 3 votes[perl] Yet Another (more generic) parser for Apache's server-status handler. Fetches the server-status page of an apache, extracts some information and evaluates them. Tested with Apache 2.0 - not (yet) working with Apache 1.x -
SMB Share checker
3 from 2 votesSimple sh script to check if smb shares are "up" -
ping_remote.bat ( with check_nrpe + nsclient)
from 0 votes
-
Check Fail2Ban Service
from 0 votesMonitoring the Fail2Ban Service -
check_acp
from 0 votesCheck the status of Adobe Connect Pro -
check_listen_tcp_udp.sh
from 0 votesThis Nagios Plugin checks if there is any program listening on specified TCP/UDP port. -
check_bonding.sh
from 0 votesTests bonding interfaces (comptatilb with multiple interfaces) -
check_icap.pl
from 0 votesCheck an ICAP daemon's health via network